Questions & Answers
   |
Technical Specs. NEDCO Machinery
Can I put the machine near a wall?
Yes. This is one of the benefits of this machinery. Operation of the equipment
is from one side or the other. Floor space required is approximately 5 Feet
wide by 20 Feet long. (Average for Folder/Bagger-Sealer & Conveyor)
Can I get the machine(s) in a different voltage?
Yes. 110, 220/240 and 440/480 are available. The machines are also available in
50Hz or 60Hz.
How much Air do I need?
The complete E-Z Fold line requires 80 PSI (Pounds per Square Inch) at 3-5 CFM
(Cubic Feet per Minute).
What Size compressor do I need?
1 ½ -2 HP minimum. The air must be clean and dry.
What size door do I need to get the machine into my
building?
Minimum door opening width is 36 inches.
Where do I get service?
NEDCO provides factory direct service. Many of our dealers also offer factory
trained field service. For additional service information you can call the
technical hot line listed in the owner's manual.
Is the machine safe?
Yes. There are many safety features designed into the E-Z Fold equipment.
Emergency shut-off knobs at each end of the machine, pinch point protection and
safety labeling are all standard features.
What are the dimensions of the folding
machine, Bagger-Sealer & Incline Conveyor?
Machine
Specifications for E-Z Fold 1000:
| Specifications | United States | International |
| Weight | 1,200 LBS. | 544 KG |
| Length | 9 Feet | 3 Meters |
| Width | 2 Feet | 61 Centimeters |
| Height | 50 Inches | 127 Centimeters |
| Electrical Requirements | 110 Volts AC / 10-15 Amps | 220 -330 -440 /Any Phase Available |
| Air Requirements | 80 PSI / 3-5 Cubic Feet per Minute | 80 PSI / 3-5 Cubic Feet Per Minute |
| Floor Space Required | 20 Square Feet | 185.5 Decimeters |
| Shipping Crate Size | 12' X 6' X 3' | 4M X 2M X 1M |
| Shipping Weight | 1,600 LBS. | 726 KG |
Machine Specifications for Unibagger II:
| Specifications | United States | International |
| Weight | 150 Lbs. | 68 KG |
| Length | 5 Feet | 152 Centimeters |
| Width | 2 Feet | 61 Centimeters |
| Height | 40 Inches | 101 Centimeters |
| Electrical Requirements | 110 Volts AC / 10-15 Amps | |
| Air Requirements | 80 P.S.I. / 3-5 Cubic Feet Per Minute | 80 P.S.I. / 3-5 Cubic Feet Per Minute |
| Floor Space Required | 10 Square Feet | 10 Square Feet |
| Shipping Crate Size | 7 Ft. X 2 Ft. X 3 Ft. | 2M X 1M X 1M |
| Shipping Weight | 175 Lbs. | 79 KG |
Machine Specifications for 6-L Incline Conveyor
| Specifications | United States | International |
| Weight | 110 Lbs. | 50 KG |
| Length | 5 Feet | 2 Meters |
| Width | 2 Feet | 60 Centimeters |
| Height | 40 Inches | 100 Centimeters |
| Electrical Requirements | 110 / 220 Volts AC / 10-15 Amps. | 110 / 220 Volts AC 50/60 HTZ |
| Floor Space Required | 10 Sqaure Feet | 10 Square Feet |
| Shipping Crate Size | 5 Ft. X 4 Ft. X 2 Ft. | 2M X 1M X 1M |
| Shipping Weight | 150 Lbs. | 68 KG |
